Exclusive to Lethbridge Fasteners! Makita HP001GZ 40V Max Brushless Hammer Driver Drill
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. Improved performance with massive drilling capacities with up to 152mm hole saw capacity and 50mm auger bit capacity. Equipped with Active Feedback Sensors the tool will automatically shutdown in the event of a kickback. With drilling speeds up to 35% faster then the equivalent 18V model. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
- Drilling Modes - screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 20mm hole diameter.
- Active Feedback Sensing Technology (AFT) - sensors shut down the tool in the event of a kickback providing user protection. If the bit rotation is suddenly forced to stop such as the bit jamming the motor automatically shuts down.
- Electronic Clutch - jog wheel with digital display allows for setting the selected torque quickly and easily. With 41 settings in low speed (1-45Nm) and 21 settings in high speed (1-10Nm).
- Mechanical speed control - with an increase of the drilling speed (2,600rpm) on the HP001G it is able to drill 35% faster than the equivalent 18V model.
- Compact Overall Length - for improved handling and control the overall length has been reduced by 23mm vs. the 18V equivalent.
- High Power Output - the high power 40Vmax XGT Li-Ion battery allows for continuous operation in heavy-duty applications such as drilling with self-feeding bit or auger bit
- Max. drilling capacities in wood:
- Auger bit: 50mm
- Self-feeding bit: 76mm
- Hole saw: 152mm
- Max. drilling capacities in steel: 20mm
- Max. drilling capacities in masonry: 20mm
- No load speed:
- Hi: 0 - 2,600rpm
- Lo: 0 - 650rpm
- Impact rate:
- Hi: 0 - 39,000ipm
- Lo: 0 - 9,750ipm
- Max. peak torque: 141Nm
- Max. tightening torque:
- Hard: 140Nm
- Soft: 68Nm
- Overall length: 182mm
- Skin weight: 2.0kg
- Weight (with battery): 3.0kg (BL4040)
- Voltage: 40V Max
* All Pictures Shown Are For Illustration Purpose Only. Actual Product May Vary Due To Product Enhancement.
We Also Recommend
Clearance Type A Hex Head Washered Self Tapping / Roofing Screws - painted
Clearance Bostitch 16S2-50GAL 1" x 2" 16-Gauge Galvanized Construction Staples 6,000/Box
Clearance Bostitch 16S2-25FG10M 1" x 1" 16-Gauge S2 Series Flash Galvanized Staples 10,000/box