Victory Plastics A.T.K. Q-Deck Hanger Clips Aluminum
The A.T.K. Q-Deck Hanger is the only hanger on the market designed to suspend threaded rod from the Q-Deck. It’s the fastest, most economical way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures, and more from a Q-Deck. The Q-Deck Hanger eliminates unsightly holes chiseled or punched in the side of the Q-Deck, weakening the deck. With the Q-Deck Hanger, you can keep damage to roof insulation to a minimum.
The A.T.K. Q-Deck Hanger can be used as a pre-insert in concrete when used on top of the deck, by threading the rod up 2 1/2" and putting a hex knot on the rod, where there is concrete poured on top of the Q-Deck. Lab tests on a 23 gauge Q-Deck with 10 x 3/4 tek screws show the Q-Deck slotted at the screws' holes at 1,130 lbs. on the bottom and 1,570 lbs. on the top. Recommended loads at a 4-1 safety factor are 285 lbs. on the bottom and 390 lbs. on top.Specifications:
|Size||#||Lab Pull-Test Top||Lab Pull-Test Bottom||Recommended Load 5-1 Safety Top||Recommended Load 5-1 Safety Bottom|
|1/4"||QD-14||1,570 lbs||1,130 lbs||314 lbs||226 lbs|
|3/8"||QD-38||1,570 lbs||1,130 lbs||314 lbs||226 lbs|
|1/2"||QD-12||4 hole||1-1/2" wide||-||-|
* All Pictures Shown Are For Illustration Purpose Only. Actual Product May Vary Due To Product Enhancement.
We Also Recommend
5mm-0.80 Diameter Hex Head Bolt Coarse Thread Grade 8.8 Zinc Plated