The A.T.K. Q-Deck Hanger is the only hanger on the market designed to suspend threaded rod from the Q-Deck. It's the fastest, most economical way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures, and more from a Q-Deck. The Q-Deck Hanger eliminates unsightly holes chiseled or punched in the side of the Q-Deck, weakening the deck. With the Q-Deck Hanger, you can keep damage to roof insulation to a minimum.
The A.T.K. Q-Deck Hanger can be used as a pre-insert in concrete when used on top of the deck, by threading the rod up 2 1/2" and putting a hex knot on the rod, where there is concrete poured on top of the Q-Deck. Lab tests on a 23 gauge Q-Deck with 10 x 3/4 tek screws show the Q-Deck slotted at the screws' holes at 1,130 lbs. on the bottom and 1,570 lbs. on the top. Recommended loads at a 4-1 safety factor are 285 lbs. on the bottom and 390 lbs. on top.
Specifications:| Size | # | Lab Pull-Test Top | Lab Pull-Test Bottom | Recommended Load 5-1 Safety Top | Recommended Load 5-1 Safety Bottom |
|---|---|---|---|---|---|
| 1/4" | QD-14 | 1,570 lbs | 1,130 lbs | 314 lbs | 226 lbs |
| 3/8" | QD-38 | 1,570 lbs | 1,130 lbs | 314 lbs | 226 lbs |
| 1/2" | QD-12 | 4 hole | 1-1/2" wide | - | - |
* All Pictures Shown Are For Illustration Purpose Only. Actual Product May Vary Due To Product Enhancement.