Nylon Drive Screw Anchors - Countersink Head – Phillips Drive Screw
The UCAN Drive Screw Anchor is manufactured from a tough and durable Nylon-6 and is preassembled with a zinc plated phillips or square socket drive screw and also stainless steel. The reinforced head holds the fixture firmly in place. This anchor is suitable for all masonry and concrete base materials.
Features:
- Ready to use, assembled fasteners for through fastening
- Impact expansion by hammer
- Removable with a screwdriver
- Environmentally friendly – contains no Cadmium
- Reinforced screw shoulder firmly grips the nylon body neck
Typical Applications:
- Conduit clips
- Electrical boxes
- Brick ties
- Flashing
- Tilt-up forms
- Wood sleepers
- Drywall "hat" track
| Part No. | Drill Bit Diameter | Length | Fastens up to |
| MNA 530 | 5mm | 30mm | 5mm |
| MNA 550 | 5mm | 50mm | 25mm |
| MNA 670 | 6mm | 70mm | 45mm |
Note:
Always drill holes 6mm deeper than embedment
Countersink Head – Phillips Drive Screw
| Part No. | Drill Diameter | Length | Fastens up to |
| MNA 860 | 8mm | 60mm | 25mm |
| MNA 880 | 8mm | 80mm | 45mm |
| MNA 8100 | 8mm | 100mm | 60mm |
Note:
Always drill holes 6mm deeper than embedment
* All Pictures Shown Are For Illustration Purpose Only. Actual Product May Vary Due To Product Enhancement.